General Standard Features & Options

Some equipment items may change w/o notice
We are a Member in good standing of ABYC (American Boat & Yacht Council)
Our shop is an ABYC® certified Facility

General Hull specifications 26’ – 32’

  • Deadrise: variable: 14 degree @ stern, 26 @ mid-ships, 56 @ entry
  • Bottom: thickness: 1/4" 5086 H116 Aluminum plate
  • One piece Sides: thickness 3/16” 5086 H116 Aluminum plate
  • All Boats: CAD Drawn and Router cut for accuracy
  • All hull parts: 5086 H116 alloy, stringers , frames, longitudinals, Router cut egg-crate style for welding accuracy and superior strength and integrity of joints
  • Large anchor locker for manual or optional electric windlass
  • Approx. 6” spray rail for bow lift and a drier ride
  • All Hull seams are Dye checked with penetrate and developer for a defect free hull
  • All Fuel Tanks made with 3/16” 5086 H116 Aluminum plate and pressure checked
  • 1-1/4”OD. welded aluminum hand rail 31” tall on gunnels,
  • Full length 1-1/4” OD. aluminum Roof-top handrails & Grab-rails
  • Hulls equipped with three heavy duty welded Rub rails for hull protection and strength
  • Six -11” custom (billet) made & welded mooring cleats
  • Large insulated & masserated fish boxes w/ 700-800lb capacity
  • Have transom walk through for easy boarding & safety
  • All Hulls have flush or recessed Airmar® brand depth & fish-finder transducers
  • All Boats have swim ladders for emergency man overboard rescue

General Cabin specifications

  • Closed cell mix and pour foam used below decks for complete flotation
  • Spray foam above water line for comfort & sound deadening
  • Self-bailing decks with two large 2” X 6” scuppers
  • 1- 1200 -2000 gal. bilge pump w / high-water alarm system
  • Standard Interior lighting 5.5” dia. S.S. Dome High low Zeon Lts, & courtesy Lts
  • Cabin windows are lightly tinted 1/4" tempered safety glass
  • Sliding windows on side & rear cabin windows
  • For front windshields we use AFI two speed wipers w/fresh water windshield washers
  • Large access & escape hatch to bow through cuddy ceiling
  • Cuddy finished w/ carpet & Abitibi® paneling, sole hippo bed-liner product
  • Main cabins are finished with real wood paneling on side walls and foam and headliner or vinyl fabric on ceilings or Abitibi® ceiling customers choice
  • We use South American hardwood ( epai ) for trim in Cabins (optional Teak-Holly flooring)
  • Standard flooring for cabin & cuddy sole decks finished w/ hippo® bed-liner coating system
  • Cabins have fully insulated lockable sliding Cabin Doors W / large fixed window

Paint

  • Full (AWL-GRIP®) paint system, customers color choice
  • Zolotone® used on gunnels, cockpit and cabin back
  • Trilux 33® anti-fouling-bottom paint and primer system
  • Full anti-skid cockpit , gunnels, swim deck & bow

Electrical

  • Norvelle Boats is ABYC certified in Marine Electrical and marine systems
  • All wire oversized to meet or exceed ABYC standards
  • We use marine grade stranded & tinned cable & ABYC approved breakers throughout for over current protection
  • All electric connections crimped & we heat shrink all connections for dependability & durability
  • With twin engine setup we use 3 large marine grade batteries with circuit breakers
  • All Boat models use Blue Seas® power panels & breakers
  • All Navigation , anchor & all around lights are LED for very low amperage draw and long life & dependability
  • Ritchie lighted compass standard

Plumbing

  • 6-US. gal. S.S. water heater
  • 35-US. gal freshwater tank w/ 3 gal expansion tank & 45 psi pump
  • 80 psi saltwater wash down in cockpit
  • We use ½” Pex® tubing throughout
  • Manual Jabsco® toilet w / 12-US.gal holding tank
  • Optional Tecma® electric flush and masserated toilet

Engines and Equipment

  • Twin Honda’s are Standard with 26’ – 32’ hulls
  • All boats are equip w/ Teleflex no feed-back Hydraulic steering
  • Power assist steering optional
  • Fuel tanks 3/16” 5086 aluminum ( 26’-28’ 200 gal tank and 32’ 300 gal tank)
  • Zinc anodes standard (optional Electro-guard Cathodic system )
  • Optional I/O Diesels will not interfere with cockpit deck ,No dog house on deck

Optional Equipment

Not limited to list

  • 12v remote search lights
  • 2000 watt inverter
  • 120v - 6 gal. water heater
  • 12 volt power points for electric reels down riggers etc
  • electric & manual crab davits
  • roof mounted dingy hull vee blocks and hoist
  • stainless steel rails
  • live bait tanks
  • underwater lights
  • 12v anchor windlass
  • bow & stern thrusters
  • custom bait station
  • taco® brand tuna poles
  • downriggers
  • Sodium lights 500 watt 120v
  • shore power system
  • isolation transformer
  • Your choice of electronics
  • Wallas Heaters & stoves
  • Refrigerator Freezers
  • Custom Cabinets
  • Electro-Guard® Cathodic protection for hull
  • freshwater showers